I have a number of W2, W5 and LA Small Block Mopar Parts including rotating assembly and intakes.
W2 Small Block Mopar Head Castings, intake and rocker arm assembly
One new set of W2 race head casting number P5249769 as delivered by Mopar. This head requires the use of T&D or Jesel rocker systems. It has 3/8 valve guides, 18 degree valve angle and closed chamber combustion chambers. These heads come with a used Victor W2 and used T&D rocker arm setup. The T&D rocker arms have very light valve retainer clearancing and have been used for 5 dyno pulls only. Total price for this combination of parts is $2,800
Mopar Performance Rocker Arms for W2 / W5 Heads
I have 16 new Mopar Performance 1.5 ratio roller W2 exhaust rocker arms for the W2 & W5 Race heads using offset drilled blocks and shafts. I will sell individual rockers or sets of 2, 4,6 or 8 as needed. Individual rockers are $40 each plus shipping. A set of 8 is $280 plus shipping.
Mopar Small Block Solid Roller Lifters For Race Block - New
I have 11 pairs (one complete engine set plus 3 spare pairs) of new Mopar Performance solid roller lifters for small block Mopar race blocks still in their packages. I took one pair to photograph. Part number is P5249584. See the included picture from the 1997 Mopar Performance catalogue for the description. The roller wheel size is ~ 0.80”.
The price for the 11 pairs is $650 shipped in the lower 48 States
Mopar Small Block Roller Rocker Kit 1.6 Ratio - New
I have a new PRW 1.6 ratio roller rocker arm kit containing all parts needed to install these rocker arms including steel bushed rocker arms, rocker arm shafts, spacers, shims, adjusters, steel shaft hold downs and hold down hardware. This kit is new in the box and is PRW part # 3231812.
Price is $495 shipped in the lower 48 states.
Other Small Block Mopar LA Parts
I have several used single plan LA engine intake manifolds $275 plus shipping.
I have several sets of new forged pistons for 360 CI and 340 CI engines
I have several new small block Mopar solid flat tappet cams
I also have a new 360 stroker kit that comes to 408 ci and a new 340 main stroker kit that comes to 414 ci. Both kits contain new SCAT 4.0” crankshafts, new SCAT H-beam rods, new Sealed Power and Clevite bearings, new moly rings, new Diamond flat top pistons and locks, and new Trend wrist pins. Assemblies will need balancing. Price for each kit is $2,750 plus shipping.
I have quite a few other parts. Let me know what you are looking for.
I will ship internationally for the added cost.
Contact me with any questions.
